Stenner Classic Series Pumps

Stenner Classic Series Pumps

Stenner Pump Classic Series

CLASSIC SERIES

  • Output adjustment from 5-100% in 2.5% increments
  • Snap-fit components allow service without tools
  • Self-priming Up to 25 feet
  • Does not lose prime or vapor lock
  • Pump tubes accept a variety of chemicals
  • Pumps against pressures up to 100 psi (6.0 bar)

The Classic series is a single or double head pump. Each pump is available as adjustable or fixed output, perfect for accuate and repeatable injection of chemicals or liquid additives. The adjustable model outputs range from 5 to 100% by utilizing the external dial ring. The fixed output models are ideal for use with controllers or with Stenner's proportional injection systems for dosing based on water volume.

Specifications

Outputs at 60Hz
0-25 psi (0-1.7 bar)

gallons per day 0.20 to 170.00
gallons per hour 0.01 to 7.08
liters per day 0.80 to 643.50
liters per hour 0.03 to 26.80
ounces per minute 0.02 to 15.10
milliliters per minute 0.56 to 446.88

26-100 psi (1.7-6.9 bar)

gallons per day 0.20 to 40.00
gallons per hour 0.01 to 1.67
liters per day 0.80 to 151.40
liters per hour 0.03 to 6.31
ounces per minute 0.02 to 3.55
milliliters per minute 0.56 to 105.14
Note: Contact factory for outputs at 50Hz

Voltage

120V, 220V 60Hz
230V, 250V 50Hz International

Motor

Shaded pole
45 & 100 series: 26 rpm
85 & 170 series: 44rpm

Horsepower

1/30 fractional

Amp Draw at Maximum Load

1.7 at 120V
0.9 at 220V, 230V, 250V

Shipping Weight

8-10 lbs (3.6-4.5 kg)

Box Dimensions: l x w x h

Single Head
13 x 8 x 9 in (33.0 x 20.4 x 22.9 cm)

Double Head
17 x 8 x 9 in (43.2 x 20.4 x 22.9 cm)