OP-85-L Poly-Orthophosphate Corrosion Inhibitor And Sequestrant

OP-85-L Poly-Orthophosphate Corrosion Inhibitor And Sequestrant

US Water Systems OP-85-L is a specially formulated very unique poly-orthophosphate which is an extremely effective corrosion inhibitor and sequestrant for use in potable water systems. The product is a highly concentrated liquid of exceptional purity, clarity, and stability utilizing a broad spectrum of phosphates for better sequestering and corrosion control.

Benefits

• Inhibits corrosion in distribution system water lines, iron, galvanized, lead, and copper plumbing
• Extends the life of the distribution system
• Inhibits lead and copper leaching resulting in lower lead and copper levels in the delivered potable water
• Prevents pinhole leaks that develop in copper plumbing
• Minimizes the occurrence of microbial-influenced corrosion providing longer life system
• Controls iron and manganese minimizing rusty and dirty water in the system
• Reduces discoloration, staining, and mineral build-up
• Diminishes calcium scale deposits typically seen in hot water lines and heaters
• Saves money by reducing corrosion and scale

Proper Use

OP-85-L is engineered to be injected into any potable water system and meets all NSF and FDA Standards as well as being Kosher Approved

It is best used with a Stenner Proportional Injection System and solution tank

OP-85-L is highly concentrated so as to minimize shipping costs and should be mixed with 10 to 20 gallons of clean water per quart, depending upon your water quality. Contact one of US Water Systems Certified Water Specialists for proper mixing in your application.

OP-85-L Dosage Calculator

Enter your feed pump and tank details to size a batch of OP-85-L poly-orthophosphate solution.

Input Values

OP-85-L Dose ?

How much phosphate you want in the treated water. Start Low for mild iron or scale, and step up to Medium or High if staining or scaling continues.

Low — 1 mg/L Medium — 2 mg/L High — 3 mg/L

OP-85-L Pump Rate ?

The output of your chemical feed pump — how many gallons of solution it injects per day.

Gal / Day

Inlet Flow Rate ?

Time how long a 5-gallon bucket takes to fill and divide 300 by those seconds.

Gal / Min

Chemical Solution Tank Size ?

The capacity of the tank that holds your diluted OP-85-L solution. Enter the tank’s rated size — the batch is mixed to fill it.

Gallons

Output Values

OP-85-L Per Solution Tank

— mL

— fl oz  ·  — gallons

Specific Gravity1.51

Concentration25.5%

Estimates only. Verify residual phosphate with a test kit after start-up and adjust the feed rate to your target. Questions? Call (855) 923-6913.

Reset