Sani - System RO Sanitizing Packet - US Water Systems
Sani - System RO Sanitizing Packet - US Water Systems
Sani - System RO Sanitizing Packet - US Water Systems
Sani - System RO Sanitizing Packet - US Water Systems
Sani - System RO Sanitizing Packet - US Water Systems
Sani - System RO Sanitizing Packet - US Water Systems

Sani-System RO Sanitizing Packet

List Price: Factory Direct Price: SALE PRICE:
$11.59 $7.52
$6.95
$6.95
40% OFF FACTORY DIRECT SAVINGS
SKU: 710-SS-96RO

Sani System is proven to kill 99.9% of E. coli, E. coli O157:H7, Staphylococcus aureus, Listeria monocytogenes and other harmful bacteria. It does not use chlorine, other oxidizers or acids that can harm equipment parts.

Please note that this product is limited to economy and ground shipping options and cannot be expedited due to Hazmat restrictions. Shipping is also limited to Continental United States only.
Subtotal: $6.95

Free Shipping

Free standard shipping on most products over $199.

One Year Satisfaction Guarantee

Learn More.
Sani - System RO Sanitizing Packet - US Water Systems

Sani-System RO Sanitizing Packet

$11.59 $6.95
Sani - System RO Sanitizing Packet - US Water Systems
Sani - System RO Sanitizing Packet - US Water Systems
Sani - System RO Sanitizing Packet - US Water Systems

Sani-System RO Sanitizing Packet

$11.59 $6.95
Product Overview

Pro Sani Systems is the only EPA approved water system sanitizer. Sani System is formulated to sanitize RO units and Water Coolers.

  • Sani System is proven to kill 99.9% of E. coli, E. coli O157:H7, Staphylococcus aureus, Listeria monocytogenes and other harmful bacteria.
  • It does not use chlorine, other oxidizers or acids that can harm equipment parts.
  • Use is simple; each dose comes in a pre-measured pouch
  • Quantity Pricing Available - 24 per case

Instructions

  1. Shut off water supply to the RO unit and remove membrane and all filters. If applicable, turn off pump. Use rubber gloves and store filters and membranes in water to prevent damage.
  2. Open pure water faucet and depressurize the system
  3. Pour entire packet of Sani System RO Unit Sanitizer directly into the first main housing unit and re-install the cartridge (a dummy filter may be required for newer models). Make sure pure water faucet is closed and turn on the water supply
  4. Allow system to fill with water. Time will vary depending on water pressure. However, system should be full within 5-10 minutes without the filter or membrane installed. Once full, let system set for 60 seconds then flush system two times.
  5. Replace or re-install filters and membrane.

Literature | Manual Product Overview
Sani System SDS Sani System SDS
Videos Literature | Manual

Overall rating: 4.25 / 5 from 16 reviews.

AI Generated Review Summary

Summary topics

Review topics: [].

Review highlights

Reviews

Sani-System sanitizing packet

"This product works great. I’ve used it many times now with each filter change and it’s kept my system tasting clean. It don’t leave any chemical taste if you follow the drain and fill instructions."

— Curt L. (5/5)

RO system

"Works well! I can keep a clean RO system!"

— bryan w. (5/5)

Easy to use

"Easy to use"

— Tim H. (4/5)

The solution yields a clean

"The solution yields a clean system, and together with new cartridges, gets the resistivity back up. Those few drops are surprisingly concentrated. After you think the solution has been fully flushed out, give the system and extra three or four more flushes before replacing the cartridges."

— Larry S. (5/5)

"I wish it came with a syringe"

— Jacob (5/5)

RO replacement filters

"Always good quality replacement parts"

— Joseph B. (5/5)

Price

"Price is right"

— Joe S. (5/5)

"Easy to store and use. Ordering process was very easy."

— Martin (4/5)

Didn't work

"I followed instructions, ran one packet through my RO system, then tested it for bacteria. No change, system still contaminated. So I ran a second packet through: Same result. Two packets, no change. This is not an effective product for decontaminating RO systems."

— Frank S. (1/5)

Shipping/ Handling Outrageous

"The shipping and handling were almost the same cost as the packet."

— Jerry M. (3/5)

Q&A

Does it kill pink mold/slime?
It can help if the pink slime is inside your RO system—the Sani-System packet is an RO sanitizer that kills common bacteria and can reduce biofilm. But “pink mold” often grows on faucet aerators and wet surfaces, so you may also need to clean/disinfect those areas to fully get rid of it.
How do I use this to sanitize the US Water Ultimate RV Filter System I have from you?
Sanitation of interior surfaces of Ice Machines, Water Coolers, Water holding tanks and Pressure tanks, Ice Machines Sanitization should occur after initial installation, after the machine is serviced and periodically during its use. * Prepare a solution of 1 oz. of sanitizer per 8 gallons of water (200 ppm active quaternary) * Circulate solution through machine making sure to wet all surfaces and allow a minimum contact of 60 seconds. * Drain and completely flush system twice with potable water.
How many packets to sanitize a 98 gallon fresh water tank RV?
Sanitation of interior surfaces of Ice Machines, Water Coolers, Water holding tanks and Pressure tanks, Ice Machines Sanitization should occur after initial installation, after the machine is serviced and periodically during its use. * Prepare a solution of 1 oz. of sanitizer per 8 gallons of water (200 ppm active quaternary) * Circulate solution through machine making sure to wet all surfaces and allow a minimum contact of 60 seconds. * Drain and completely flush system twice with potable water.
Do i need to sanitize the RO system during initial installation or during the filter change?
We do recommend adding 5 ml of the sanitizing solution to the green tank line during initial installation.

You May Also Need

Recently Viewed Products

Cursor
Example product title
$11.59
$6.95
Example product title
$11.59
$6.95
Example product title
$11.59
$6.95
Example product title
$11.59
$6.95
Example product title
$11.59
$6.95
Example product title
$11.59
$6.95
Example product title
$11.59
$6.95
Example product title
$11.59
$6.95
Example product title
$11.59
$6.95
Example product title
$11.59
$6.95