#7 Stenner Santoprene Replacement Pump Tubes - 2 Pack This is Tube Size #7 The modular design of the Stenner Classic Series pumps makes replacing components quick and easy. These pump tubes are genuine Stenner replacement tubes and not some lesser quality imitation. Refer...

150 GPD (to Drain) John Guest Assembled Flow Restrictor Ell - BLACK Fits Most Reverse Osmosis Membrane Housings with 1/8" Female threads Includes John Guest 1/4" Quick-Connect x 1/8" MPT (Male Pipe Thread) with Black Restrictor installed Note: Select a flow restrictor that is...

Reverse Osmosis Tank - Powder Coated Black 4.5 Gallon 4.5 Gallon Powder Coated Steel RO Storage Tank - 11" Diameter X 16" Height. This is a professional grade tank designed for use in residential and light commercial reverse osmosis applications. Specifications Storage Capacity: 4.5...

3/8" John Guest Quick Connect x 1/4" MPT Elbow Part Number: PP481222E This fitting is made of the following components: The body is produced in polypropylene (polypro) 'O'Rings are EPDM The collet is produced in polypropylene with stainless steel teeth Quantity Discounts Available -...

1/4" John Guest Quick Connect x 1/4" MPT Elbow Part Number: PP480822E This fitting is made of the following components: The body is produced in polypropylene (polypro) 'O'Rings are EPDM The collet is produced in polypropylene with stainless steel teeth Quantity Discounts Available -...

2.5" x 10" Double O-Ring Seal Residential Filter Housing - 1/4" Inlet/Outlet The US Water Systems 2.5” x 10” Cartridge Housing is a Commercial Grade Housing that will handle heavy filtration needs for years. It accepts any US Water Systems 2.5” x 10” double...

US Water Craftmaster Floor-Mount Three-Stage 4.5" x 20" Water Filtration System Filters Included 5 Micron Pleated Sediment Carbon Block Chlorine Filter Catalytic Carbon Chloramine Filter 3/4" or 1" Full Flow Inlet & Outlet Includes mounting bracket, screws, and filter wrench. Includes Floor-Mounted Frame (fully...

Replacement Filter Pack for Ametek Kleen Plus RO-2127, WSRO10C, And HDRO-10AG 3-Stage Reverse Osmosis System like the one pictured All Filters are Made in the USA NSF Certified for Ametek Global High Purity Reverse Osmosis Systems Includes (1) 5 Micron Pre-Filter (155225-43 Compatible)) (1)...

US Water 3-Stage DI Filtration System | AP310-DIS A cost-effective solution to deionize water. Features Includes all fittings, faucet and tubing for undersink installation. 3/8" flow throughout the system Includes all filters: Stage 1- 3:L DI Deionization Cartridges. Filters should be replaced approximately every...

High Pressure Switch - Part # 200907 Features Automatically starts when the tank pressure falls below 40 psi and stops when the pressure reaches 60 psi. Designed for the control of electrically driven water pumps. Diaphragm actuated. Type FSG is the standard water pump...

Stenner Santoprene Replacement Injection Duckbill Check valve - 1/4" - 5 Pack The modular design of the Stenner Classic Series pumps makes replacing components quick and easy.  These duckbill check valves are genuine Stenner duckbills and not some lesser quality imitation. Refer to the...

US Water Systems Interceptor 2.5" x 20" DOE Filter Cartridge US Water Electro-Absorptive Nanofiber Filter Uses Mechanical Filtration And Electro-Adhesion Utilizing Cutting-Edge Technology The US Water Interceptor Pre-Filter has a 5 micron outer filter layer (which can be washed off if sediment accumulated). Inside...

Commercial 3-Stage Foodservice High Capacity Water Filtration System This 3-Stage filtration system is designed to filter the water supply for high usage ice machines, drinking systems, reverse osmosis pre-filtration, coffeemakers and any other foodservice application where high quality water is needed. Stages Stage 1:...

US Water 2.5" x 20" Re-Mineralization Filter - 1/4" Calcite is naturally occurring calcium carbonate media. Upon contact with acidic waters, calcite slowly dissolves and the calcium carbonate raises the pH, which reduces potential leaching of copper, lead and other metals found in typical...

John Guest 3/8" Stem x 3/8" Barb Fitting Part Number: PP251212W This fitting is made of the following components: The body is produced in polypropylene (polypro) 'O'Rings are EPDM The collet is produced in polypropylene with stainless steel teeth Quantity Discounts Available - Call...

Genuine replacement part for RO UltraTec Titan 1500 Titan 1800 Titan 2000 Flexeon BT-1500 Flexeon BT-1800 Flexeon BT-2000 Part Number 207665 Replaces Procon Pumps The rotary vane pumps are volumetric pumps designed for pumping water and moderate aggressive liquids with low flow at high...

Ideal for all water purification applications, waste water regulation, aquaculture, hydroponics, and colloidal silver. Perfect for both consumer or commercial use. Carry one in your pocket or toolbox at all times! Features Ideal for commercial use. Includes a carrying case with belt clip. Highly...

8” x 44” Fiberglass Water Filter or Water Softener Tank Structural tanks used to be called “Structural Fibers" and they were made in Chardon, Ohio. The name was simply shortened to “Structural". Structural composite fiberglass wound resin tanks are sealed with epoxy resin over...

Our 5-Stage Filter Pack for the PurEdge5 Five-Stage Drinking Water Purification System includes silicone to ensure a proper seal and extend the life of the o-rings, helping maintain optimal system performance.Includes (1) Interceptor PAC Filter (1) Chloramine Carbon Block Filter (1) 1/4" NPT In-Line...

AXEON® HF5–Series Membrane Elements are manufactured using the industry’s leading membrane film technology. These membranes offer reliability, high performance and deliver consistent results. They provide increased production, high rejection rates and ultra low energy consumption by operating at low applied pressures.AXEON HF5–Series Membrane Elements are the...