For Business

AXEON® NF6–Series Membrane Elements are designed for low energy operating pressures at 70 psi. These membranes are made for tap water application and are specially designed for the removal of polyvalent ions while maintaining allowing low passage of salts. NF6–Series Membranes have flow rates from...

AXEON® SE1–Series Reverse Osmosis Membrane Elements offer superior rejection and flow rates for high salinity and high rejection applications. These membranes are fiberglass wrapped and feature high flow rates up to 9,000 gpd with 99.75% rejection. AXEON SE1–Series Membranes operate at lower than standard pressures to be...

HR3–Series Reverse Osmosis Membrane Elements offer the highest salt rejection rates at 99.5% and up to 2,200 gallons per day. Protected with a hard ABS shell, HR3–Series RO Membranes continue to be a top choice amongst equipment operators for high salinity applications. With an operating pressure of...

Compatible with:Upstream NC15-50

Compatible with:Upstream NC15-75

Compatible with:Hallett 13

Pulsar UV Remote Alarm Module Allows for a remote connection on Pulsar UV products Allows for the remote installation of alarms, lights, PLC input, data logger, flow control, etc. Simply plug the supplied into the IEP expandability port on the UV sensor module (or...

Harmsco Hurricane HUR 1X170 SB Housing Harmsco® Hurricane® Swing Bolt filter housings provide unsurpassed performance. Their unique design separates dense solids prior to cartridgefiltration for extended filter life, increased dirt holding capacity and reduced maintenance costs. Features Patented Up-flow Design NSF 61 listed Electro-polished...

Stenner Versilon #5 Replacement Pump Tubes - 2 Pack The modular design of the Stenner Classic Series pumps makes replacing components quick and easy. These pump tubes are genuine Stenner replacement tubes and not some lesser quality imitation. Refer to the chemical compatibility guide...

Stenner High Pressure #2 QUICKPRO Tygothane Replacement Pump Head The modular design of the Stenner Classic Series pumps makes replacing components quick and easy.  These pump heads are genuine Stenner and not some lesser quality imitation.  Includes tygothane pump tube, and 1/4" ferrules. Refer...

Stenner Classic Low Pressure Santoprene Pump Head Service Kit The modular design of the Stenner Classic Series pumps makes replacing components quick and easy.  This pump head service kit is a genuine Stenner service kit and not some lesser quality imitation. Refer to the...

Stenner 7.5 Gallon Translucent White Tank for Series 45 & 85 Stenner Pumps Stenner Part No. STS7NC Polyethylene construction - rugged for indoor and outdoor applications Approved to NSF/ANSI 61 Large opening with locking lid tab - child resistant lid Includes Stainless Steel Screws...

Stenner 45MPHP22 single head fixed output pump for high pressure (up to 100psi) applications. Stenner Classic Series metering pumps are self-priming and the 3-point roller assembly provides a positive 2-point seal on the pump tube at all times. This eliminates the need for anti-siphoning...

Stenner 45M4 Series single head adjustable output pump for low pressure (up to 25psi) applications. Stenner Classic Series metering pumps are self-priming and the 3-point roller assembly provides a positive 2-point seal on the pump tube at all times. This eliminates the need for...

Stenner 45M2 Series single head adjustable output pump for low pressure (up to 25psi) applications. Stenner Classic Series metering pumps are self-priming and the 3-point roller assembly provides a positive 2-point seal on the pump tube at all times. This eliminates the need for...

Stenner 170DMPHP34 double head fixed output pump for high pressure (up to 100psi) applications. Stenner Classic Series metering pumps are self-priming and the 3-point roller assembly provides a positive 2-point seal on the pump tube at all times. This eliminates the need for anti-siphoning...

Recirculating Dispensing Gun for CLïR 5000 Series Ultra-high Purity Water System

AXEON® NF6–Series Membrane Elements are designed for low energy operating pressures at 70 psi. These membranes are made for tap water application and are specially designed for the removal of polyvalent ions while maintaining allowing low passage of salts. NF6–Series Membranes have flow rates from...

AXEON® NF3–Series Membrane Elements are manufactured using the industry’s leading membrane film technology. These membranes offer reliability, high performance and deliver consistent results. Water treatment professionals have come to rely on the superior performance and dependability of AXEON NF3–Series Membrane Elements.AXEON NF3–Series Membrane Elements are ideal for...

AXEON® LE1–Series Reverse Osmosis Membrane Elements are designed for low energy operating pressures of 150 psi. These membranes offer flow rates up to 12,500 gallons per day with nominal rates of 99%. LE1–Series RO Membrane Elements are NSF-61 certified, and are manufactured in a state-of-the-art, ISO-9001 compliant...